Grade 100 Through Hardened Chrome Steel Balls

Industry Standard Grade 100 Hardened Steel Ball Bearings: High Quality Graded Hardened Chrome Steel Ball bearings made from Chromium AISI 52100 steel. Hardened to 60-67 Rockwell Scale equivalent to 700-900 HV (Vickers Scale) and are hardened all the way through the ball. These are the same hardened steel balls used to manufacture bearing assemblies and have a high duty and life cycle.
Manufactured in compliance to the following international standards: AISI52100 / EN31 / BS534A99 / W1.3505 / BS535A99 / UNI100C6 / AFN100C6 / DIN100C6 / JIS G4805 SUJ2

Grade 10 Through Hardened Chrome Steel Balls

High Precision Grade 10 Hardened Steel Ball Bearings: High Quality Graded Hardened Chrome Steel Ball bearings made from Chromium AISI 52100 steel. Hardened to 60-67 Rockwell Scale equivalent to 700-900 HV (Vickers Scale) and are hardened all the way through the ball. These are the same hardened steel balls used to manufacture bearing assemblies and have a high duty and life cycle.
Manufactured in compliance to the following international standards: AISI52100 / EN31 / BS534A99 / W1.3505 / BS535A99 / UNI100C6 / AFN100C6 / DIN100C6 / JIS G4805 SUJ2

Grade 1000 Through Hardened Chrome Steel Balls

General Purpose Grade 1000 Hardened Steel Ball Bearings: High Quality Graded Hardened Chrome Steel Ball bearings made from Chromium AIS 52100 steel. Hardened to 60-67 Rockwell Scale equivalent to 700-900 HV (Vickers Scale) and are hardened all the way through the ball. These are the same hardened steel balls used to manufacture bearing assemblies and have a high duty and life cycle.
Manufactured in compliance to the following international standards: AISI52100 / EN31 / BS534A99 / W1.3505 / BS535A99 / UNI100C6 / AFN100C6 / DIN100C6 / JIS G4805 SUJ2

Grade 100 Stainless 316 Through Hardened Steel Balls

Industry Standard Grade 100 316 Stainless Ball Bearings: High Quality Graded 316 Stainless Steel Ball bearings made from AISI 316 Stainless Steel with a hardness of 25 - 39 Rockwell Scale equivalent to 140 - 160 HB (Brinnel Scale) the hardness is all the way through the ball. These are the same stainless 316 steel balls used to manufacture bearing assemblies and have a high duty and life cycle. Un-hardened austenitic stainless steel with good corrosion resistance to sea water, dilute nitric, sulphuric and acetic acids, photo chemicals, inks, bleaches, dyes etc. Can be machined / drilled
Manufactured in compliance to the following international standards: AISI 316 / AFN Z6CND17-11 / DIN X5 Cr Ni Mo 17122 / JIS SUS 316 / Wks 1.4401

Grade 100 Stainless 420 Through Hardened Steel Balls

Industry Standard Grade 100 420 Stainless Ball Bearings: High Quality Graded 420 Stainless Steel Ball bearings made from AISI 420 Stainless Steel with a hardness of 52 -55 HRC Rockwell Scale, the hardness is all the way through the ball. These are the same stainless 420 steel balls used to manufacture bearing assemblies and have a high duty and life cycle. The most commonly used martensitic stainless steel giving fair corrosion resistance to fresh water, steam, petrol, alcohol, blood, sweat, oils and foodstuffs.
Manufactured in compliance to the following international standards: AISI 420 / BS970 420S37 420S45 / DIN 1.4021, 1.4025, 1.4034 / AFNOR Z30C13, Z40C14 / JIS SUS 4200JI, 420J2

Grade 2000 Stainless 430 Through Hardened Steel Ball Bearings

Grade 2000 430 Stainless Ball Bearings: High Quality Graded 440 Stainless Steel Ball bearings made from AISI 440 Stainless Steel with a hardness of 57 - 60 HRC Rockwell Scale, the hardness is all the way through the ball. These are the same stainless 440 steel balls used to manufacture bearing assemblies and have a high duty and life cycle. Martensitic Stainless steel offering high hardness and tensile strength against fresh water, steam, petroleum spirits and alcohols.
Manufactured in compliance to the following international standards: AISI 430 / BS 970 430 S15 / DIN 1.4016 / AFNOR Z8C17 / JIS SUS 430

Grade 100 Stainless 440 Through Hardened Steel Balls

General Purpose Grade 100 440 Stainless Ball Bearings: High Quality Graded 440 Stainless Steel Ball bearings made from AISI 440 Stainless Steel with a hardness of 57 - 60 HRC Rockwell Scale, the hardness is all the way through the ball. These are the same stainless 440 steel balls used to manufacture bearing assemblies and have a high duty and life cycle. Martensitic Stainless steel offering high hardness and tensile strength against fresh water, steam, petroleum spirits and alcohols.
Manufactured in compliance to the following international standards: AISI 440 / Wks 1.4125 / DIN X105CrMo17 / AFNOR Z100CD17 / JIS SUS 440

About Our Budget Range

All our "Budget Bearings" are sourced in the UAE and EU (United Arab Emirates and European Union, our preferred manufacturer is KG International who manufacture from their production facility in Dubai in the United Arab Emirates.
In the event we can't supply KG Brand we will supply a high quality alternative manufacturer.

Ball Grades & Materials

A Simple Explanation of Ball Grades.

The grade refers to the surface quality and precision of the ball,

The lower the number the better the ball quality. e.g. Grade 3 is the highest quality and grade 2000 is the lowest

Grade 100 is accepted as the industry standard ball grade.

Please see Technical Specification in product listings for more info

A Simple Explanation of Stainless.

Stainless steel balls will resist corrosion but are not as hard as the chrome steel balls.

316 Stainless is suitable for food and marine applications and is not magnetic (can be magnetised eventually)

420 is a cutlery grade, is harder and polishes up well, 440 is magnetic and is one of the hardest stainless grades.

Most grades of Stainless are available (please enquire)

Watch a short video of how to select oil seals.

The Most Commonly Asked Oil Seal Questions

Question: What should my seal size be if my shaft diameter is x?

Answer: The same size as the shaft diameter. This is because the manufacturers of the seals make allowance so that the seals will be a snug fit on a shaft.

E.g. If you have a 25mm shaft then the seal's bore you require will be 25mm as would be marked on the seal
In reality if you actually measured the bore of a new seal it will be nearer 24.2mm, this is the allowance that the manufacturers build into the seal.

The same applies to the outside diameter, it should be the same diameter as the housing into which it will fit, again the manufacturer has taken into consideration any allowances to make the seal a good fit in its housing.

Seal Width: is not always fixed to replacing like for like as there are some advantages to fitting narrower or wider seals where space permits it, these instances may be where a groove has become worn in the shaft and a wider or narrower seal will allow the sealing lip to run on a fresh piece of shaft. Or where the actual width is just not manufactured any longer or discontinued.

The R21 style is a seal with a single sealing lip and is suited to applications like cranks and gearbox seals.

The R23 style is a seal with one sealing lip and a dust lip and is suited to applications like wheel bearings and anywhere there is likely to be dust and moisture, the dust lip does not act as a seal but as protection to the sealing lip.

Brands Supplied

We will always supply a FAG / INA branded bearing as our 1st choice, in the absence of FAG from our stock range we would always supply a recognised alternative brand dependent on availabilty from our stock such as: SKF, IKO, NTN, NSK, TORRINGTON, KOYO, TIMKEN, NACHI and other leading brands.

SKF

SKF are quite possibly the biggest and best known bearing manufacturer in the world. Their range of bearings and quality is second to none.
If quality is what you need then this is the brand to choose.
SKF are renound worldwide for their quality bearings, manufacturers like Audi and Volkswagen are great believers in the SKF brand.

SKF

SKF are quite possibly the biggest and best known bearing manufacturer in the world. Their range of bearings and quality is second to none.
SKF Energy Efficient Metal Shielded Deep Groove Ball Bearings: SKF E2 bearings use 30 - 50 percent less energy compared to standard SKF bearings, In many cases they run cooler at equivalent loads and speeds reducing lubricant use and extending equipment life. One of the most commonly used bearings, these types are manufactured with metal shields inserted into the outer raceway, these fit in closely to the inner race providing protection against light mechanical damage, some protection against the ingress of moisture, dust and other foreign matter and serve to retain the pre-filled grease in the bearing.
Benefits: 30 - 50 percent less energy, provides light mechanical protection, limits moisture and dirt ingress, lubricated for life

Stainless Steel Ball Bearings

Stainless steel deep groove ball bearings: Designed to resist corrosion, they are ideally suited for application in the food industry and anywhere that requires a bearing which is both hygienic and has a high resilience to water. These single row deep groove ball bearings have the same deep raceway grooves and close conformity between raceways and balls as standard deep groove ball bearings. They can carry axial loads acting in both directions in addition to radial loads, even at high speeds. Stainless steel deep groove ball bearings have the same running properties as conventional steel deep groove ball bearings, but have a lower load carrying capacity. The bearings are available in open and sealed designs for shaft diameters from 1 to 50 mm.
Benefits: Food safe, water and corrosion resilient, available up to 50mm bore.

Oil Seals

Oil Seals: Designed to aid trouble-free operation of your equipment, providing an excellent barrier against the escape of oils and greases and preventing the ingress of foreign matter.
Benefits: Excellent wear resistance, good running properties, high resistance to chemicals and petroleum based fuels including petrol, diesel and LPG.

The Most Commonly Asked Oil Seal Question

Question: What should my seal size be if my shaft diameter is 25mm / Or your shaft diameter?
Answer: The same size as the shaft diameter.
This is because the manufacturers of the seals make allowance so that the seals will be a snug fit on a shaft.
E.g. If you have a 25mm shaft then the seal's bore you require will be 25mm as would be marked on the seal. In reality if you actually measured the bore of a new seal it will be nearer 24.2mm, this is the allowance that the manufacturers build into the seal.

Clearance Items

When they are gone they are gone: These clearance items are end of line or bulk stock clearance - once they are sold there will be no more at these prices.

Viton Rubber Oil Seals

Viton Rubber Oils Seals: Characterized by their reddish brown colour and stainless steel garter springs (dependent on manufacturer they are sometimes a dull gray colour). They are well known for their excellent chemical and heat resistance up to 200 Deg celsius and to 260 Deg celsius for shorter periods down to -30 Deg celsius without affecting their elastic properties as a rubber. Resistance to common salt makes them an ideal marine solution and the great range of substances to which they are resistant like Aliphatic hydrocarbons, vegetable oils and fats as well as petroleum oils and greases, Chlorinated solvents, Acids and chemical agents, Ozone, Petroleum, Diesel etc make them a very versatile seal choice.
Benefits: High temperature range -30 Deg to +200 Deg, Chemical resistance, Stainless Steel Springs, Higher wear resistance, Lower drag coefficient

Nitrile Rubber O Rings

Nitrile Rubber O Rings: Probably one of the most widely used and simplest types of seal they are found everywhere from plumbing installations to the space shuttle, they are common in engines and gearboxes, garden hoses, pumps etc. They can be used as face to face seals (like a gasket) or as shaft seals and facilitate both rotary and linear movement. They have a wide operating temperature range from - 30 deg Celsius up to + 120 Deg Celsius and a high degree of chemical resistance. Material Specification: Nitrile Buna Rubber (NBR), 70 Shore hardness.
Benefits: Excellent sealing properties and durability, wide temp range, high resistance to many chemicals and petroleum based fuels including petrol, diesel, LPGFor other chemical resistance check here

Viton Rubber O Rings

Viton Rubber O Rings: Widely used and the simplest types of seal they are found everywhere from plumbing installations to the space shuttle, they are common in engines and gearboxes, garden hoses, pumps etc. They can be used as face to face seals (like a gasket) or as shaft seals and facilitate both rotary and linear movement. Viton rubber has a particularly wide operating temperature range ranging from - 25 deg Celsius up to + 200 Deg C (higher for short periods) and a high degree of chemical resistance. It is highly suitable for use in engines and other areas where extremes of temperature and chemical exposure are present. Material Specification: Viton Rubber (FPM), 70 Shore hardness. Benefits: Excellent sealing properties and durability, wide temp range, high resistance to many chemicals and petroleum based fuels including petrol, diesel, LPG For other chemical resistance check here

EPDM O-Rings

EPDM Rubber O Rings: This versatile rubber has an operating temperature range from approx - 53 deg up to + 148 Deg Celsius. The material has a reasonable tear and abrasion resistance. EPDMrubbers are frequently used in food applications, water, steam and phosphate ester fluid applications (skydrol). They offer excellent resistance to glycol based brake fluids and are especially suitable for outdoor application and ozone, Animal and vegetable oils, strong and oxidizing chemicals.
Material Specification: EPDM (Ethylene-Propylene-Diene-Monomer) Rubber , 70 Shore hardness.
Benefits: Excellent sealing properties and durability, wide temp range, high resistance to many chemicals including glycol based brake fluids. Not suited to petroleum based fuels including Petrol, Diesel, LPG See the resistance table for the full list

IGUS Plastic Rod End Bearings

IGUS igubal® KBRM series right hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® KBLM series left hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® KBRM - MH series right hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free, stainless steel sleeve increase torque and prevents crushing of the ball

IGUS Plastic Rod End Bearings

IGUS igubal® KBLM - MH series left hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free, stainless steel sleeve increase torque and prevents crushing of the ball

IGUS Plastic Rod End Bearings

IGUS igubal® KARM series right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® KALM series left hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® KARM - MH series right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free, stainless steel sleeve increase torque and prevents crushing of the ball

IGUS Plastic Rod End Bearings

IGUS igubal® KALM - MH series left hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free, stainless steel sleeve increase torque and prevents crushing of the ball

IGUS Plastic Rod End Bearings

IGUS igubal® KBRM - CL series right hand female thread hexagon body rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting complete with moulded locking nut

IGUS Plastic Rod End Bearings

IGUS igubal® KBRM - CLJ series right hand female thread hexagon body rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® J low moisture absorption, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting complete with moulded locking nut

IGUS Plastic Rod End Bearings

IGUS igubal® KBRM - CLR series right hand female thread hexagon body rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals.
Operating Temperature Range: Long term application temperature of 90 Deg C (up to 110 Deg C short term)
Materials: Ball material iglidur® R - Lower cost, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting complete with moulded locking nut

IGUS Plastic Rod End Bearings

IGUS igubal® KBRM - CLX series right hand female thread hexagon body rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® X Higher temperature tolerance, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting complete with moulded locking nut

IGUS Plastic Rod End Bearings

IGUS igubal® KBRM - CL MH series right hand female thread hexagon body rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals. A stainless steel sleeve is inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting complete with moulded locking nut

IGUS Plastic Rod End Bearings

IGUS igubal® KARM - CL series right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance

IGUS Plastic Rod End Bearings

IGUS igubal® KARM - CLJ series right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® J low moisture absorption, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance

IGUS Plastic Rod End Bearings

IGUS igubal® KARM - CLR series right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals.
Operating Temperature Range: Long term application temperature of 90 Deg C (up to 110 Deg C short term)
Materials: Ball material iglidur® R - Lower cost, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance

IGUS Plastic Rod End Bearings

IGUS igubal® KARM - CLX series right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® X Higher temperature tolerance, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance

IGUS Plastic Rod End Bearings

IGUS igubal® KARM - CL MH series right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals. A stainless steel sleeve is inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance

IGUS Plastic Rod End Bearings

IGUS igubal® KCRM series right hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals.
Operating Temperature Range: Long term application temperature of 90 Deg C (up to 110 Deg C short term)
Materials: Ball material iglidur® W300, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting

IGUS Plastic Rod End Bearings

IGUS igubal® KCLM series left hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals.
Operating Temperature Range: Long term application temperature of 90 Deg C (up to 110 Deg C short term)
Materials: Ball material iglidur® W300, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting

IGUS Plastic Rod End Bearings

IGUS igubal® KCRM - MH series right hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: Long term application temperature of 90 Deg C (up to 110 Deg C short term)
Materials: Ball material iglidur® W300, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting

IGUS Plastic Rod End Bearings

IGUS igubal® KCLM - MH series left hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint, they are very smooth and have no dirt traps and have high dampening qualities. They have a very high resistance to corrosion and chemicals. The MH version has a stainless steel sleeve inserted through the spherical ball for enhanced torque and prevents over tightening of the bolt through the ball.
Operating Temperature Range: Long term application temperature of 90 Deg C (up to 110 Deg C short term)
Materials: Ball material iglidur® W300, Housing igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Smooth design has no dirt traps, Compensation of misalignment, Light weight, Excellent corrosion resistance, Hexagonal shaped body to accommodate a spanner to assist in fitting

IGUS Plastic Rod End Bearings

IGUS igubal® KBRI imperial series right hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® KBLI imperial series left hand female thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® KARI imperial series right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® KALI imperial series left hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® EARM series slim body right hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

IGUS Plastic Rod End Bearings

IGUS igubal® EALM series slim body left hand male thread rod end bearings: These maintenance free plastic rod ends are a dry operation solution with a high stiffening and very high fatigue strength in varying loads. They compensate for misalignment errors and edge loads and are insensitive to dirt, dust and lint and have high dampening qualities. They are resistant to corrosion and chemicals.
Operating Temperature Range: -30 Deg C to + 80 Deg C long term - short term up to +120 Deg C
Materials: Ball material iglidur® W300, Housing: igumid G
Uses: They are suitable for rotary, oscillating and linear movements and are light weight.
Tolerances: They are manufactured in accordance to DIN ISO 12240
Benefits: Corrosion and chemical resistant, lightweight, stiff, dry operation, maintenance free

Oilite Bushes

Phosphor Bronze Bushes: Made in a variety of styles from bronze, graphite and several other metallic powders formed to shape by the sintering process and then soaked in oil. These simple bush style bearings have an extended range of applications but are particularly suited to function in the the following conditions; extreme high / low temperature, high / low speed applications, corrosive environments, low maintenance applications etc.
Benefits: Inexpensive, noiseless operation, self lubrication, low maintenance costs

Nitrile Rubber Oil Seals

Nitrile Rubber Oil Seals: Designed to aid trouble-free operation of your equipment, providing an excellent barrier against the escape of oils and greases and preventing the ingress of foreign matter.
Benefits: Excellent wear resistance, good running properties, high resistance to chemicals and petroleum based fuels including petrol, diesel and LPG

Branded A Section Wedge Type V belts:

We are official Goodyear distributors so naturally Goodyear is our preferred brand. In the absence of stock availability we will always supply a major branded belt like Continental, SKF, Fenner, Pix, Gates, Megadyne, Dunlop etc.

A Section Wedge Type V belts: Premium longer-life narrow-profile 13x8mm (1/2x5/16 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded B Section Wedge Type V belts

B Section Wedge Type V belts: Premium longer-life narrow-profile 17x11mm (21/32x7/16 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded C Section Wedge Type V belts

C Section Wedge Type V belts: Premium longer-life profile 22x14mm (7/8x9/16 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded D Section Wedge Type V belts

D Section Wedge Type V belts: Premium longer-life profile 32x19mm (1-1/4x3/4 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded Z Section Wedge Type V belts:

Z Section Wedge Type V belts: Premium longer-life profile 10x6mm (3/8x1/4 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded SPA Section Wedge Type V belts:

Premium longer-life profile 13x10mm (1/2x3/8 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded SPB Section Wedge Type V belts

SPB Section Wedge Type V belts:Premium longer-life profile 16x13mm (5/8x1/2 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded SPC Section Wedge Type V belts

SPC Section Wedge Type V belts: Premium longer-life profile 22x18mm (7/8x23/32 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded SPZ Section Wedge Type V belts

SPZ Section Wedge Type V belts:Premium longer-life profile 10x8mm (3/8x5/16 inch) belts for compact, high-power drives. Excellent in short centered drives or where high shock loads are present; can be used any place you find traditional narrow V-belts, but require a more robust composition for improved service life.
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded AX Section Wedge Type V belts

AX Section Wedge Type V belts: Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple V-belt drives where high shock load and heavy-duty loads are encountered. They have a profile of 13x8mm (1/2x5/16 inch).
Benefits@ Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Branded BX Section Wedge Type V belts

BX Section Wedge Type V belts: Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple V-belt drives where high shock load and heavy-duty loads are encountered. They have a profile of 17x11mm (21/32x7/16 inch).
Benefits: Universal classical profile to fit ISO 4183 pulleys, Low stretch polyester tensile member, Oil, ozone and abrasion resistant, Temperature resistance: -20deg C to +70deg C, Static conductive to ISO 18130

Nitrile Rubber Single Lip R21 / SC Oil Seals

An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element. Nitrile Rubber (NBR)
NBR is the most commonly used seal material. It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils, and petrol, diesel and other gasoline products. Operation temperatures are recommended from -40deg C to 120deg C. It also functions well under dry environment, but only for intermittent periods.
	Cross section of an R21 / SC style oil seal. This is a single sealing lip seal arrangement.
Construction The seal cases are made from SAE 1008-1010 Carbon Steel and are often coated in a very thin layer of Nitrile rubber to assist sealing in the housing. The principle function of the metal case is to impart rigidity and strength to the seal.
The spring is made from SAE 1050-1095 Carbon Spring Steel which has a protective zinc coating. The principle function of the spring is to maintain an even gripping pressure around the shaft

Nitrile Rubber Double Lip R23 / TC Oil Seals

An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element. Nitrile Rubber (NBR)
NBR is the most commonly used seal material. It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils, and petrol, diesel and other gasoline products. Operation temperatures are recommended from -40deg Cto 120deg C. It also functions well under dry environment, but only for intermittent periods.
	Cross section of an R23 / TC style oil seal. This is a double sealing lip seal arrangement with one primary sealing lip and a dust protection lip.
Construction The seal cases are made from SAE 1008-1010 Carbon Steel and are often coated in a very thin layer of Nitrile rubber to assist sealing in the housing. The principle function of the metal case is to impart rigidity and strength to the seal.
The spring is made from SAE 1050-1095 Carbon Spring Steel which has a protective zinc coating. The principle function of the spring is to maintain an even gripping pressure around the shaft

Nitrile Rubber Double Lip R25 / VC Oil Seals

An R25 / VC oil seal consists of two basic components: The Sealing Element (the nitrile rubber part), the Metal Case. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element. Nitrile Rubber (NBR)
NBR is the most commonly used seal material. It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils, and petrol, diesel and other gasoline products. Operation temperatures are recommended from -40deg C to 120deg C. It also functions well under dry environment, but only for intermittent periods.
	Cross section of an R25 / VC style oil seal. This is a spring less design single sealing lip seal arrangement.
Construction The seal cases are made from SAE 1008-1010 Carbon Steel. The principle function of the metal case is to impart rigidity and strength to the seal.

Nitrile Rubber Double Lip R26 / KC Oil Seals

An R26 / KC oil seal consists of two basic components: The Sealing Element (the nitrile rubber part), the Metal Case. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element. Nitrile Rubber (NBR)
NBR is the most commonly used seal material. It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils, and petrol, diesel and other gasoline products. Operation temperatures are recommended from -40deg C to 120deg C. It also functions well under dry environment, but only for intermittent periods.
	Cross section of an R26 / KC style oil seal. This is a spring less design double sealing lip seal arrangement with one primary sealing lip and a dust protection lip.
Construction The seal cases are made from SAE 1008-1010 Carbon Steel. The principle function of the metal case is to impart rigidity and strength to the seal.

Nitrile Rubber Single Lip VB Type Seals

VB oil seals consists of two basic components: The Sealing Element (the nitrile rubber part) and the Metal Case. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element. Nitrile Rubber (NBR)
NBR is the most commonly used seal material. It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils, and petrol, diesel and other gasoline products. Operation temperatures are recommended from -40deg C to 120deg C. It also functions well under dry environment, but only for intermittent periods.
	Cross section of an VB style oil seal. This is a spring less design single sealing lip seal arrangement.
Construction The seal cases are made from SAE 1008-1010 Carbon Steel. The principle function of the metal case is to impart rigidity and strength to the seal.

Nitrile Rubber Double Lip R26 / KC Oil Seals

An R26 / KC oil seal consists of two basic components: The Sealing Element (the nitrile rubber part), the Metal Case. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element. Nitrile Rubber (NBR)
NBR is the most commonly used seal material. It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils, and petrol, diesel and other gasoline products. Operation temperatures are recommended from -40deg C to 120deg C. It also functions well under dry environment, but only for intermittent periods.
	Cross section of an R26 / KC style oil seal. This is a spring less design double sealing lip seal arrangement with one primary sealing lip and a dust protection lip.
Construction The seal cases are made from SAE 1008-1010 Carbon Steel. The principle function of the metal case is to impart rigidity and strength to the seal.