Categories
Modern Warehouse
Belt Tensioner and Idler Pulleys
150-452 by Stens Starter Pulley Fits Stihl 1128 195 0400
- Genuine Stens quality part
- Direct OEM replacement
Stens Starter Pulley: A starter pulley is a key componement to a recoil starter assembly. Starter pulleys are used for larger engine engines that are fitted with plastic pawls and plate. (Not [show more]...
150-094 by Stens Starter Pulley Fits Briggs and Stratton 280439S
- Genuine Stens quality part
- Direct OEM replacement
Stens Starter Pulley: A starter pulley is a key componement to a recoil starter assembly. Starter pulleys are used for larger engine engines that are fitted with plastic pawls and plate. (Not [show more]...
Outside Diameter: 104.78mm = 4.125 (4-1/8) inch
275-0019 by Stens Transmission Pulley Fits Castelgarden/22601904/0
- Genuine Stens quality part
- Direct OEM replacement
Stens Transmission Pulley: Transmission pulley for use with Castelgarden/22601904/0
Fits Castelgarden/22601904/0
150-300 by Stens Starter Pulley Fits Homelite PS03117
- Genuine Stens quality part
- Direct OEM replacement
Stens Starter Pulley: A starter pulley is a key componement to a recoil starter assembly. Starter pulleys are used for larger engine engines that are fitted with plastic pawls and plate. (Not [show more]...
Inside Diameter: 50.8mm = 2 inch
Outside Diameter: 63.5mm = 2.5 (2-1/2) inch
150-376 by Stens Starter Pulley Fits Stihl 4238 190 1001
- Genuine Stens quality part
- Direct OEM replacement
Stens Starter Pulley: A starter pulley is a key componement to a recoil starter assembly. Starter pulleys are used for larger engine engines that are fitted with plastic pawls and plate. (Not [show more]...
280-0059 by Stens Idler Fits Castelgarden/25601558/2
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 14.68mm = 0.578 (37/64) inch
Outside Diameter: 50.01mm = 1.969 (1-31/32) inch
Width: 19.05mm = 0.75 (3/4) inch
150-995 by Stens Starter Pulley with Rope Briggs and Stratton 295871
- Genuine Stens quality part
- Direct OEM replacement
Stens Starter Pulley: A starter pulley is a key componement to a recoil starter assembly. Starter pulleys are used for larger engine engines that are fitted with plastic pawls and plate. (Not [show more]...
Outside Diameter: 136.53mm = 5.375 (5-3/8) inch
280-097 by Stens Flat Idler Fits John Deere GX20287
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 17.46mm = 0.687 (11/16) inch
Outside Diameter: 85.73mm = 3.375 (3-3/8) inch
Width: 26.99mm = 1.063 (1-1/16) inch
275-280 by Stens Spindle Pulley Fits AYP 153532
- Genuine Stens quality part
- Direct OEM replacement
Stens Spindle Pulley: Spindle pulleys are used as part of a mechanical spindle assembly. The main components of a mechanical spindle are usually composed of a main shaft, a bearing and a [show more]...
Inside Diameter: 16.26mm = 0.64 inch
Outside Diameter: 123.83mm = 4.875 (4-7/8) inch
280-028 by Stens Flat Idler Fits Snapper 7012124YP
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 6.35mm = 0.25 (1/4) inch
Outside Diameter: 57.15mm = 2.25 (2-1/4) inch
Width: 15.88mm = 0.625 (5/8) inch
280-271 by Stens V-Idler Fits Toro 62-4530
- Genuine Stens quality part
- Direct OEM replacement
Stens V-idler Pulley: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 9.53mm = 0.375 (3/8) inch
Outside Diameter: 77.79mm = 3.063 (3-1/16) inch
Width: 15.88mm = 0.625 (5/8) inch
280-858 by Stens Flat Idler Fits John Deere AM121970
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They?re often used with belt tensioners (sold [show more]...
Inside Diameter: 7.93mm = 0.312 (5/16) inch
Outside Diameter: 79.38mm = 3.125 (3-1/8) inch
Width: 28.58mm = 1.125 (1-1/8) inch
280-143 by Stens V-Idler Fits John Deere GX20286
- Genuine Stens quality part
- Direct OEM replacement
Stens V-idler Pulley: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 17.46mm = 0.687 (11/16) inch
Outside Diameter: 73.03mm = 2.875 (2-7/8) inch
Width: 15.88mm = 0.625 (5/8) inch
280-880 by Stens Flat Idler Fits Exmark 109-4077
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They?re often used with belt tensioners (sold [show more]...
Inside Diameter: 17.46mm = 0.687 (11/16) inch
Outside Diameter: 117.48mm = 4.625 (4-5/8) inch
Width: 26.99mm = 1.063 (1-1/16) inch
280-255 by Stens V-Idler Fits Toro 93-0320
- Genuine Stens quality part
- Direct OEM replacement
Stens V-idler Pulley: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 9.53mm = 0.375 (3/8) inch
Outside Diameter: 66.68mm = 2.625 (2-5/8) inch
Width: 15.88mm = 0.625 (5/8) inch
280-263 by Stens V-Idler Fits John Deere AM103019
- Genuine Stens quality part
- Direct OEM replacement
Stens V-idler Pulley: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 9.53mm = 0.375 (3/8) inch
Outside Diameter: 77.79mm = 3.063 (3-1/16) inch
Width: 19.05mm = 0.75 (3/4) inch
280-065 by Stens Flat Idler Fits MTD 956-0217
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 9.53mm = 0.375 (3/8) inch
Outside Diameter: 82.55mm = 3.25 (3-1/4) inch
Width: 25.4mm = 1 inch
280-032 by Stens Flat Idler Fits Snapper 7013850YP
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 9.53mm = 0.375 (3/8) inch
Outside Diameter: 63.5mm = 2.5 (2-1/2) inch
Width: 22.23mm = 0.875 (7/8) inch
275-096 by Stens Spindle Pulley Fits MTD 956-1227
- Genuine Stens quality part
- Direct OEM replacement
Stens Spindle Pulley: Spindle pulleys are used as part of a mechanical spindle assembly. The main components of a mechanical spindle are usually composed of a main shaft, a bearing and a [show more]...
Inside Diameter: 12.7mm = 0.5 (1/2) inch
Outside Diameter: 158.75mm = 6.25 (6-1/4) inch
275-288 by Stens Spindle Pulley Fits AYP 532173434
- Genuine Stens quality part
- Direct OEM replacement
Stens Spindle Pulley: Spindle pulleys are used as part of a mechanical spindle assembly. The main components of a mechanical spindle are usually composed of a main shaft, a bearing and a [show more]...
Outside Diameter: 117.48mm = 4.625 (4-5/8) inch
275-515 by Stens Spindle Pulley Fits MTD 756-0969
- Genuine Stens quality part
- Direct OEM replacement
Stens Spindle Pulley: Spindle pulleys are used as part of a mechanical spindle assembly. The main components of a mechanical spindle are usually composed of a main shaft, a bearing and a [show more]...
Outside Diameter: 127mm = 5 inch
Width: 25.4mm = 1 inch
280-123 by Stens Flat Idler Fits Ariens 08844251
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 9.53mm = 0.375 (3/8) inch
Outside Diameter: 114.3mm = 4.5 (4-1/2) inch
Width: 22.23mm = 0.875 (7/8) inch
280-131 by Stens Flat Idler Fits Toro 36-3220
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 9.53mm = 0.375 (3/8) inch
Outside Diameter: 114.3mm = 4.5 (4-1/2) inch
Width: 30.16mm = 1.187 (1-3/16) inch
280-239 by Stens Flat Idler Fits AYP 532175820
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 9.53mm = 0.375 (3/8) inch
Outside Diameter: 114.3mm = 4.5 (4-1/2) inch
Width: 25.4mm = 1 inch
280-242 by Stens Flat Idler Fits John Deere GY20629
- Genuine Stens quality part
- Direct OEM replacement
Stens Flat Idler: These pulleys spin freely on built-in bearings to maintain tension for reduced wear, friction and vibration on drive belt systems. They're often used with belt tensioners [show more]...
Inside Diameter: 17.46mm = 0.687 (11/16) inch
Outside Diameter: 130.18mm = 5.125 (5-1/8) inch
Width: 44.45mm = 1.75 (1-3/4) inch