Enduro Extended Inner Race Max Type Rubber Sealed Deep Groove Ball Bearings: These types are manufactured with an extended inner race with rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign matter and serve to retain the pre-filled grease in the bearing.
MAX Type bearings have no cage and a filling slot for the balls. MAX stands for Maximum Balls possible in the bearing which is achieved by using the filling slot to insert the balls, the balls are effectively next to each other.
They generally have a 35% more load capacity than caged bearings. MAX bearings do not spin as smoothly as the cage bearings and should in general be used for suspension pivots or problem areas where standard bearings wear out prematurely.
Static Load capacities are limits well before deformation of the bearing and are conservative.
Always install bearings by pressing on the outer race only into a housing with a fixture that is a close match to its diameter, never knock bearings into their housings with a hammer - premature bearing failure will occur from knocking bearings into housings. With max type bearings in application like suspension pivots try to position the filling slot at 90 degrees to the loading direction where practical.
Seals: Seals can be easily removed for applications that only require 1 seal. Benefits: Prevents moisture and dirt getting into the bearing, lubricated for life, maximum load capacity
Note: These bearings may feature 'C3' on the box, this is not in reference to internal clearance and is a manufacturer code.
Brand / Quality: Enduro - High Quality Inside Diameter: 7.93mm = 0.312 (5/16) inch Outside Diameter: 20.64mm = 0.813 (13/16) inch Width: 7.14mm = 0.281 (9/32) inch Seals / Shields: Rubber Sealed Please note: MAX type/full complement bearings are commonly used for pivots and suspension, not generally recommended for Hubs/Bottom brackets etc.
Inside Diameter
=
5/16 inch
Outside Diameter
=
13/16 inch
Width
=
9/32 inch
Static Load
=
1.757 kN
Weight
=
9.69 g
Matteo Bruce,
United Kingdom
Review added on 29/05/2019
High quality service, high quality bearings.
Yadiel Edgar,
United Kingdom
Review added on 17/09/2015
Quick delivery and great quality product. thank you Simply Bearings
Kay Tang,
United kingdom
Review added on 12/06/2015
Great for replacing the creaky factory pivot bearings on a Marin Mount Vision.
Now runs completely silent just make sure you align the bearing slot properly to avoid having to refit them.
Harley Ari,
United Kingdom
Review added on 10/03/2015
CYCLE NOW REPAIRED AND READY FOR SPRING THANKS TO THE GOOD QUALITY BEARINGS AND SPEEDY SERVICE .
THANKLS
Alex Eduardo,
United Kingdom
Review added on 10/03/2015
Very pleased to find the origianl manufacturers bearings for sale at asensible price and delivered free.
Simply bearings are the UK's largest online retailer of bearings, seals, belts, chains, sprockets, lubricants and other associated power transmission equipment.
Simply Bearings Ltd, Halton House, Greenfold Way, Leigh Greater Manchester WN7 3XJ United kingdom
