Viton Rubber Oil Seals: Characterized by their reddish brown colour and stainless steel garter springs (dependent on manufacturer they are sometimes a dull gray colour).
They are well known for their excellent chemical and heat resistance up to 200 Deg celsius and to 260 Deg celsius
for shorter periods down to -30 Deg celsius without affecting their elastic properties as a rubber. Resistance to common salt makes
them an ideal marine solution and the great range of substances to which they are resistant like Aliphatic hydrocarbons,vegetable oils and fats as well as petroleum oils and greases, Chlorinated solvents, Acids and chemical agents, Ozone, Petroleum, Diesel etc make them a very versatile seal choice Benefits: High temperature range -30 Deg to +200 Deg, Chemical resistance, Stainless Steel Springs, Higher wear resistance, Lower drag coefficient
Brand / Quality: Simply VIT Seals - High Quality Inside Diameter: 76.2mm = 3 inch Outside Diameter: 95.25mm = 3.75 (3-3/4) inch Width: 9.4mm = 0.37 inch Colour: Brown Rubber Material: Viton Repair Shaft Sleeves?
Viton® withstands high temperature and simultaneously retains its good mechanical properties better than most other elastomers. Oil and chemical resistance also are relatively unaffected by elevated temperatures. Compounds of Viton® remain usefully elastic indefinitely when exposed to laboratory air oven aging up to 204 Degrees Celsius (400 Degrees Fahrenheit) or to intermittent test exposures up to 260 Degrees Celsius (500 Degrees Fahrenheit). High temperature service limits are generally considered to be:
3 hrs. at 232 Degrees Celsius (450 Degrees Fahrenheit)
1 hr. at 260 Degrees Celsius (500 Degrees Fahrenheit)
240 hrs. at 288 Degrees Celsius (550 Degrees Fahrenheit)
48 hrs. at 316 Degrees Celsius (600 Degrees Fahrenheit)
Cold
Generally serviceable in dynamic applications down to -18 Degrees to -23 Degrees Celsius (0 Degrees to -10 Degrees Fahrenheit), although special formulations permit its use in static applications down to -54 Degrees Celsius (-65 Degrees Fahrenheit). Also, has proven to be satisfactory for static seals used under conditions approaching absolute zero.
2. Resistance to degradation by a greater variety of fluids and chemicals than any non-fluorinated elastomer, providing the best proven fluid resistance of any commercial rubber. Excellent resistance to oils, fuels, lubricants, and most mineral acids.
3. Extremely low permeability to a broad range of substances, including particularly good performance in oxygenated automotive fuels.
4. Resistance to many aliphatic and aromatic hydrocarbon fluids that act as solvents for other rubbers.
5. Exceptionally good resistance to compression set, even at temperatures which can embrittle other non-fluorinated elastomers.
6. Exceptionally good resistance to atmospheric oxidation, sun, and weather. Excellent resistance to fungus and mold.
7. Good electrical properties in low voltage, low frequency applications.
8. Low burning characteristics; inherently more resistant to burning than other non-fluorinated hydrocarbon rubbers.
Write a Product Review
3x3.75x0.37 inch Viton Rubber Imperial Double Lip Rotary Shaft Oil Seal with Garter Spring
Simply bearings are the UK's largest online retailer of bearings, seals, belts, chains, sprockets, lubricants and other associated power transmission equipment.
Simply Bearings Ltd, Halton House, Greenfold Way, Leigh Greater Manchester WN7 3XJ United kingdom
Brands
This website uses cookies
We use cookies that are necessary for the operation of this site. We also use cookies to analyse the statistics of our site traffic.