Bore |
= |
1/4 inch |
A - Housing height |
= |
32mm |
A1 - Housing foot height / flange height |
= |
13.3mm |
A2 - Total height from mounting surface |
= |
41.5mm |
B - Width of Inner Ring |
= |
38.1mm |
d - Shaft diameter |
= |
31.75mm |
e - Distance mounting surface to bearing centre |
= |
19.3mm |
G - Grease fitting |
= |
1/4-28 inch |
H - Housing length, width or diameter |
= |
138.5mm |
H1 - Distance housing side to centre of bearing insert |
= |
96.5mm |
J - Mounting holes distance |
= |
47.6mm |
J3 - Distance mounting hole to bearing centre |
= |
52.4mm |
J4 - Mounting hole distance |
= |
31.8mm |
L - Housing width / diameter |
= |
83mm |
L2 - Housing flange width |
= |
76mm |
N - Mounting hole dimension |
= |
10.7mm |
S - Distance front side/bearing centre |
= |
15.9mm |
C - Dynamic load rating |
= |
16.7 kN |
C0 - Static load rating |
= |
9 kN |
Operating temperature min. |
= |
-20 Deg C |
Operating temperature max. |
= |
100 Deg C |
Mass |
= |
0.488kg |
Recommended tightening torque for set screw |
= |
3.9 Nm |