Stainless Steel Deep Groove Ball Bearings: Designed to resist corrosion, they are ideally suited for application in the food industry and anywhere that requires a bearing which is both hygienic and has high resilience to water. These single-row deep groove ball bearings have the same deep raceway grooves and the close conformity between raceways and balls as standard deep groove ball bearings. They can carry axial loads acting in both directions in addition to radial loads, even at high speeds. Stainless steel deep groove ball bearings have the same running properties as conventional steel deep groove ball bearings, but have a lower load-carrying capacity. The bearings are available in open and sealed designs for shaft diameters from 1 to 50 mm.
Benefits: Food safe, water and corrosion resilient, available up to 50mm bore
Note: These bearings will eventually corrode in a marine environment and it is recommended to completely cover with grease or similar protection where practical. Due to the material requirements of these bearings to have a hard-wearing construction, they will be made of a harder form of Stainless Steel, such as 440 or similar, which will be attracted by magnets. Quotations for non-magnetic versions are available upon request.
Brand / Quality: EU Budget - Economy Quality Inside Diameter: 3mm Outside Diameter: 10mm Width: 4mm Seals / Shields: Metal Shielded Clearance: * Standard
d
=
3mm
D
=
10mm
B
=
4mm
C
=
0.54 kN
Co
=
0.18 kN
Pu
=
0.007 kN
Reference speed
=
130000 rpm
Limiting speed
=
60000 rpm
Weight
=
0.0015 kg
d1
=
5.2mm
D2
=
8.2mm
r1r2 min
=
0.15mm
da min
=
4.2mm
Da max
=
8.8mm
ra max
=
0.1mm
kr
=
0.025
fo
=
7.5
Giovanni Burgess,
United Kingdom
Review added on 27/04/2021
Even with all this COVID going on, you still manange to deliver an amazing service, well done guys
Rex Richmond,
United Kingdom
Review added on 09/01/2019
Top Quality bearing at a fantastic price will buy again
Ian Cottee,
United kingdom
Review added on 24/04/2015
I was extremely pleased that you had these bearings in stock and the nice lady who I spoke with was very efficient in cross referencing the bearing identification number to the present day reference. I opted for the cheaper bearings because these were for use on a fishing reel which I hoped would be transformed in to a superb casting machine.
Unfortunately this was not the case but it wasn't the fault of the bearings - so it was a wise choice.
Arthur Cash,
United Kingdom
Review added on 17/12/2014
Brilliant when on a budget! Thank you
Write a Product Review
W6232Z Quality Budget Stainless Steel Metal Shielded Deep Groove Ball Bearing 3x10x4mm
Simply bearings are the UK's largest online retailer of bearings, seals, belts, chains, sprockets, lubricants and other associated power transmission equipment.
Simply Bearings Ltd, Halton House, Greenfold Way, Leigh Greater Manchester WN7 3XJ United kingdom
